Maximum pressure: 0-2MPA 2-10MPa
Maximum temperature: 120 ° C
Maximum speed: 0-1500r / min 1500-3000r / min 3000- 8000r / min
Medium: water, hydraulic oil, air, coolant
密封滚动轴承终生不需润滑，平衡式的密封载荷和磨损降到最低限度，降 低了扭矩，密封材料具有自润滑性， 弹簧组件位于流体通道的外侧，因此 能降低压力损耗，避免介质中颗粒的滞留，在总体上改善了流体的品质。 High-speed rotary joint structural features: anti-corrosive material, special design does not damage the joint under empty conditions, sealed rolling bearings need no lubrication for life, balanced seal load and wear are reduced to a minimum, torque is reduced , and the seal is sealed The material is self-lubricating. The spring assembly is located outside the fluid channel, so it can reduce pressure loss, avoid the retention of particles in the medium, and improve the quality of the fluid as a whole.
Hydraulic high-speed pneumatic rotary joints for water, hot oil, and steam applications
Stainless steel outer tube is corrosion resistant and has a longer service life
Complete and uniform flow design, low pressure loss
Two precision imported bearing supports ensure long-term trouble-free operation
Balanced mechanical seal design reduces the abrasion of seal surface to seal load and prolongs service life greatly
Best sealing mating surface
Outer pipe with threaded or quick-change flange connection
The housing is provided with a grease nipple for reasonable maintenance of bearings and prolongs the service life
The casing is equipped with observation holes to observe the leakage and wear conditions in order to take timely maintenance measures
空气型采用了铝或者铝合金与铜壳体，优点是在高速传动下，散热性能好， 缺点就是容易变形，给维修带来不便。 The shell material selected by Jiang Sheng rotary joint is copper alloy shell for water type and aluminum or aluminum alloy and copper shell for air type. The advantage is that under high-speed transmission, the heat dissipation performance is good, the disadvantage is that it is easy to deform and give maintenance belts. Inconvenience. 铝合金壳体，内装进口SKF、TIMKEN轴承、浸涕石墨环、304不锈钢碳化硅轴、耐磨氟胶O型圈适合于高速旋转设备，使其更耐磨、寿命更长！ Aluminum alloy housing with imported SKF, TIMKEN bearings, dipped graphite rings, 304 stainless steel silicon carbide shaft, wear-resistant fluorine rubber O-rings are suitable for high-speed rotating equipment, making them more wear-resistant and longer life!