⎝⎛178电玩城⎞⎠

Ranch
Welcome to Shandong Jiangsheng Machinery Manufacturing Co., Ltd.!
当前位置: 旋转接头 > 新闻资讯 > 常见问答 > FAQCurrent Position: Rotary Joint > News > FAQ >

Analysis of Water Leakage of Rotary Joints

Time: 2019-08-30 10:10 Author: admin Hits: Times
1. Improper installation When the rotary joint is installed, due to improper operation or other human factors, the seal ring is likely to deviate from the normal seal diameter. After the sealing pressure and the external pressure are superimposed, the rubber ring is squeezed, causing the rotary joint to deform and cause the seal to fail. Leaking.
2. The sealing cost of the material shrinking rotary joint is higher than that of the ordinary joint. Some manufacturers reduce the material material standard in order to save costs. The high temperature and high pressure resistance of the sealing component are also reduced, which is likely to fail in the high temperature and high pressure environment. Give way.
3. Housing material When we manufacture rotary joints, we use a stainless steel shell, which has good corrosion resistance and thermal conductivity, which can reduce the temperature rise of the sealed components inside the rotary joint and prolong the service life.
High-speed rotary joint
    CONTACTContact Us
    Marketing Department: 0632-5659366 5619366 5652866
    Sales Hotline: Manager Liu 18766677790 Manager Wang 18363793666
    Technical Department: 0632-5652399 Fax: 0632-5659266
    Ministry of Foreign Trade: 0632-5829399
    Email: tzjiangsheng@163.com Address: No. 52, Tengzhou Economic Development Zone
    Copyright: Shandong Jiangsheng Machinery Manufacturing Co., Ltd. Record number: Lu ICP No. 14035694
    欢乐拼三张 七乐彩 欢乐拼三张 天天电玩城